Build Plugins for Elk#

Sushi is a headless Linux host that supports VST 2.x and 3.x plugins using an unmodified versions of Steinberg’s APIs. It also supports LV2 plugins natively. So there is no need to do custom porting of your code, if it runs on a normal Linux system without dependencies on graphics libraries such as X11.

Depending on your current codebase, though, you might need some code changes to meet the above mentioned requirements, and you will need to recompile your plugin using Elk’s provided gcc-based cross-compiling toolchain. This document is a short guide to help you through the needed steps.

As a recommended first step, make sure that your plugin builds and runs under a normal Linux distribution, with a Linux plugin host such as Carla, MrsWatson or Sushi itself.

Cross-Compiling Toolchain#

For each targeted platform, we release a cross-compiling toolchain based on gcc (clang available on request) that replaces all the commands of the standard toolchain, including make, CMake, system libraries, etc.

You just need to source the environment setup script to activate the toolchain. From a terminal shell, enter the LinuxBuild directory with the Makefile in it and type:

$ source [path-to-extracted-sdk]/environment-setup-[aarch-name]-elk-linux

Then, proceed to build your plugin using e.g. make or CMake depending on your configuration. In case you need to build for other architectures, just replace the path to the environment script with the correct one depending on the installed cross-compiling toolchain.

If you had previously changed your LD_LIBRARY_PATH, you would need to first issue the #$ unset LD_LIBRARY_PATH command, before activating the toolchain following the preceding instructions. In case it is more convenient in your case, you can just remove the relevant line in /home/minddev/.zshrc.

VST 2.x Plugins Using Steinberg SDK#

This use case is for those that don’t rely on a cross platform framework like JUCE to generate VST 2.x plugins but rather want to use the original Steinberg SDK directly.

Please notice that Steinberg has discontinued the VST 2.4 SDK, so it is no longer available for download since October 2018. You are still allowed to use the SDK and release VST 2.4 plugins if you have obtained a signed agreement with Steinberg prior to that date.

The process in this case should be trivial if your plugin doesn’t have dependencies on any graphical libraries - this includes the VST GUI framework.

VST 3.x Plugins Using Steinberg SDK#

This should also be straightforward by using standard build systems. Since release 3.6.6, Steinberg also uses CMake as its primary build system and since 3.6.10, there have been several improvements for making it easier to use in a cross-compiling setup.

There is an example plugin that can be compiled with the provided toolchain under work/vst3-template, that also includes examples for communication between RT and non-RT threads using atomic-based lockless FIFOs.

After cross-compilation, ensure that the folder under “plugin.vst3/Contents” is named aarch64-linux, not arm64-linux, or the plugin will not work on the Elk-Pi - rename it yourself if needed.

VST Plugins Using JUCE#

Most developers use a cross-platform framework like JUCE for generating multiple versions of their plugins for various OSes / formats.

JUCE actively supports Linux as a build target, so if you don’t use any other third-party libraries incompatible with Linux, it should be straightforward to compile your plugins for Elk.

Note that any caveats and issues applying to each specific plugin format (i.e. VST 2, 3 detailed above) apply also when these are exported using JUCE.

Moreover, there are a couple of important issues to consider:

Plugins using JUCE Version 6 or above#

JUCE can be used directly for building VST plugins for Elk, due to its new “headless” features.

Observe that the build process still requires X11 headers to be available (and we have included these to our X-compilation SDK). The produced binary will then detect whether a display is available on the platform, and run as a headless plugin if not.

The following steps are involved to cross-compile using JUCE’s new CMake support - demonstrated using the JUCE/examples/CMake/AudioPlugin plugin.

(The below example assumes a RPi4 build with our v1.0.0 SDK installed in the default location).

  1. Begin by copying the AudioPlugin folder out of the JUCE folder.

  2. Clone a fresh copy of JUCE as a subfolder of AudioPlugin

  3. $ git clone https://github.com/juce-framework/JUCE.git.

  4. We need to un-set $CC $CXX - one practical way we have found, is to edit /path/to/your/copied/AudioPlugin/JUCE/extras/Build/juceaide/CMakeLists.txt, removing the lines that unset the environment variables. For example starting from line 61 (or line 58 in Juce ver 6) remove all the unset(ENV{}) calls. For example in JUCE 7:

- unset(ENV{ADDR2LINE})
- unset(ENV{AR})
- unset(ENV{ASM})
...
...
- unset(ENV{WINDRES})

  1. Edit AudioPlugin/CMakeLists.txt as follows:

    1. Un-comment line 27: add_subdirectory(JUCE).

    2. Alter line 55 to only include the target format(s) to produce, for example: FORMATS VST3

    3. Remove line 111: juce::juce_recommended_lto_flags - the LTO setting breaks x-compiling Release builds.

  2. In your AudioPlugin folder, type:

    1. $ mkdir x-build && cd x-build (Very handy to keep your x-build in a separate folder from your native one).

    2. $ unset LD_LIBRARY_PATH

    3. $ source /opt/elk/1.0.0/environment-setup-cortexa72-elk-linux (path to the extracted SDK)

    4. $ export CXXFLAGS="-O3 -pipe -ffast-math -feliminate-unused-debug-types -funroll-loops"

    5. $ cmake ../ -DCMAKE_BUILD_TYPE=Release

    6. $ make -j (enter number of cores) CONFIG=Release CFLAGS="-Wno-psabi" TARGET_ARCH="-mcpu=cortex-a72 -mtune=cortex-a72" (Assuming a RPi4 build)

The resulting AudioPluginExample_artefacts/Debug/VST3/Audio Plugin Example.vst3is ready to use on your Elk-Pi device.

Plugins using JUCE Version 5.x#

If you cannot use the latest version of JUCE, it is possibly to also build using versions 5.4.x, though there are more steps involved, and limitations to consider.

  • JUCE release 5.4.x only generates VST 2.4 plugins for Linux.

  • Generated plugins have a dependency on the X11 libraries.

To overcome the second problem, we created a JUCE fork that allows headless plugin builds for Linux so that they can run easily in Sushi on Elk boards. The fork mocks up all the calls to the graphical backend and, moreover, Sushi never invokes the plugin’s editor functions. As a consequence, you don’t need to remove the GUI parts from your code, as long as you only used JUCE for the GUI, as they will have no performance overhead, and it will be easier to maintain a single codebase for your product. You might consider optimizing away loading of graphics resources to save memory and plugin loading time, though.

If you use JUCE 5.4 you need to:

  1. Build Projucer from the Elk JUCE fork, and import the .jucer file for your project.

  2. Inside Projucer:

    • Ensure that the File -> Global Paths… are set so that paths to JUCE and JUCE Modules are those of the JUCE Elk fork.

    • Choose only “VST Legacy” as audio plugin type under project properties.

  3. Follow the instructions in the next section to export a makefile.

  4. If you use Projucer release 5.4.1, due to a bug you need to manually modify the exported Makefile and put the correct path to the VST SDK into the JUCE_CPPFLAGS variable (defined twice, for both Debug and Release). The bug is fixed in the 5.4.4 branch.

Cross-compiling JUCE Plugin#

Here are the instructions to build a JUCE plugin with the cross-compiling toolchain.

Inside Projucer:

  • Create a new exporter of type “Linux Makefile”.

  • Remove modules like juce_video or juce_opengl if present.

  • Disable the option for JUCE Browser under the module juce_gui_extra.

  • For every module, make sure to use the option “use global search path”.

  • Save the project to export a new Makefile.

For a build to test natively on Linux, just run make normally, using the -DJUCE_HEADLESS_PLUGIN_CLIENT=1 argument, or the build will fail since you are using our headless fork. Then follow the instructions at the end of this guide, on how to test your plugin with the integrated Sushi host.

To cross-compile for Elk Pi RPi4 64 bit, first source the SDK script in your shell environment:

$ unset LD_LIBRARY_PATH
$ source /path/to/environment-setup-aarch64-elk-linux

And then build your plugin using:

$ AR=aarch64-elk-linux-ar make -j`nproc` CONFIG=Release CFLAGS="-DJUCE_HEADLESS_PLUGIN_CLIENT=1 -Wno-psabi" TARGET_ARCH="-mcpu=cortex-a72 -mtune=cortex-a72"

By default, the toolchain only sets “-O2” and few other conservative options for release build flags. You might want to set them to more aggressive values in either the environment or Projucer itself. If you are setting them through the environment, an example could be to run:

$ export CXXFLAGS="-O3 -pipe -ffast-math -feliminate-unused-debug-types -funroll-loops"

LV2 Plugins#

Due to the LV2 plugin format’s architecture, it is often very straightforward to build LV2 plugins for Elk. LV2 strongly encourages the complete separation of GUI and plugin core, meaning building a headless plugin can be as simple as specifying an argument to not include the GUI, when generating the build project.

To cross compile, the following steps are specific for cross-compiling the Calf plugin collection, but should generalize well across the majority of LV2 plugins:

Generate ttl files#

This is done first since the script to generate the .ttl files won’t run with the cross compilation toolchain.

  1. Make a folder to put the native build in mkdir native.

  2. Generate project files:

    $ ./autogen.sh --prefix=/absoute/path/to/calf/native

  3. make and make install to generate the ttl files.

  4. make clean to prepare for cross compilation.

Cross Compile the plugins#

  1. Set up the cross-compilation toolchain:

    $ unset LD_LIBRARY_PATH
$ source /path/to/environment-setup-cortexa7t2hf-neon-vfpv4-elk-linux-gnueabi

  2. Create a directory to build and install the cross compilation files to $ mkdir build.

  3. Generate the makefiles:

    $ ./configure --host=arm-elk-linux-gnu --prefix=/absolute/path/to/calf/build

  4. Compile the plugin library:

    $ make
$ make install

  5. move the .ttl files to the cross-compiled build.

    $ cp native/lib/lv2/calf.lv2/*.ttl build/lib/lv2/calf.lv2/

  6. move the folder build/lib/calf.lv2 to the desired location on the Elk Pi. Make sure the path to the parent folder is in the LV2_PATH variable.

Running Compiled Plugins with Sushi on a Virtual Machine#

  1. Start JACK Server.

  2. Launch Sushi with a proper JSON file that has the path to your plugins. You can use one of the provided examples to start, e.g.: sushi -j -c ~/work/sushi/example_configs/config_fx.json

  3. Connect Sushi’s input and output ports to the system.

On most hosts, VirtualBox offers a virtual audio interface with output only. If you need to test an effect plugin, a quick way is to load an audio file in Audacity, select the JACK audio engine and connect it to Sushi.

If you need to test MIDI, you can either use a Virtual MIDI Keyboard (like vmpk) or redirect a USB MIDI device to the virtual machine. In both cases, you can use aconnect to connect the MIDI port of your control device to Sushi’s ALSA input ports, just as on a native machine.

Running Compiled Plugins with Sushi on Elk Boards#

Simply run sushi using the -r switch instead of the -j one used on a non Elk machine, e.g.:

sushi -r -c /path/to/your/config.json

If you need to connect USB MIDI devices, just plug them and connect them with the aconnect tool.

To get a rough view of CPU performance, top and similar Linux tools will only show you the amount of CPU used in non-RT tasks. To see CPU usage of Real Time tasks, use:

watch -n 0.5 cat /proc/xenomai/sched/stat

For a more fine-grained analysis, you can use Sushi’s gRPC API to query timing statistics of each track and plugin.

Analyzing and Resolving Xenomai Mode Switches#

As in any real-time system, you are not allowed to call any operating system functions from your real-time processing callback. This includes among the others:

  • Any memory allocation, directly or by using e.g. standard library containers that can allocate on their own.

  • Any thread synchronization primitives, like mutexes, semaphores, etc.

  • Some operations that are usually RT-safe on desktop systems but are not on Xenomai, for example querying system timers with e.g. clock_gettime.

We provide the Twine library as a replacement for common use cases in audio plugins, e.g. querying timers and synchronizing worker threads in a real-time safe way.

Whenever you do an operation that is not RT-safe, Xenomai will perform a mode switch, i.e. it will give back control to the Linux Kernel to perform the needed system call and then will switch back to the Cobalt Kernel to continue its activity. The performance penalty for such operations is huge and you will very likely encounter audio dropouts if any mode switch will occur.

To see how many mode switches the Sushi process has encountered, run

$ evl ps -s

The number of mode switches is indicated by the ISW counter. This number should stay stable and it’s especially important that it never grows at run-time after plugin initialization.

In order to spot code paths that are responsible for mode switches, you can launch Sushi under gdb and use a special command-line flag to activate the throw of SIGXCPU signal whenever a mode switch happens.

From a terminal in an Elk board, you need to:

  1. Launch Sushi inside gdb: gdb sushi

  2. Set gdb to break on SIGXCPU signal: catch signal SIGXCPU

    It is possible to use the ignore command in gdb to ignore the first N occurrences, in case you have some non-problematic mode switches at plugin initialization.

  3. Run by passing the –debug-mode-sw flag, plus any other argument in your case, e.g.:

run -r --debug-mode-sw -c /path/to/your/config.json

When a mode switch occurs, you should now have control over the gdb shell, and be able to analyze the backtrace, local variables, etc. to find its cause.

As a separate tool that you can use in a virtual machine or your Linux development environment, Sushi also has a dummy frontend that spawns a separate thread to mock the real-time process and never does any real-time calls. You can therefore use tools like strace or similar to spot OS calls on that thread. This is useful, for example, to spot timer related calls which can cause Xenomai lockups and are otherwise impossible to localize using the JACK frontend since the JACK audio server use the same calls on its own.